Coupe/Cabriolet

TIGHTENING SPECIFICATIONS
Bolt For Bearing Housing M9x129 mm
Initial Tightening: 25 Nm (19 ft. lbs.)
Final Tightening: 1 x 90 degrees
Connecting Rod Bolts M9 x 1.25
Initial Tightening: 20 Nm (15 ft. lbs.)
Final Tightening: 1 x 90 degrees
Bolt For Crankcase Halves M6 13 Nm (10 ft. lbs.)
Bolts, Crankcase/Bearing Housing M9 x 95/160 mm 22 Nm (16 ft. lbs.)
Plug For Assembly Bore Of Piston Pin 80 Nm (59 ft. lbs.)
Belt Pulley to Crankshaft
Initial Tightening: 50 Nm (37 ft. lbs.)
Final Tightening: 1 x 90 degrees
Crankshaft Axial Play
New Installation: 0.05 to 0.24 mm
Wear Limit: 0.28 mm