Test Point 2

TEST POINT 2
Ignition Circuit, Passenger

Fault Codes 10, 11, 26, 27, 39

1. Disconnect the plug connection to the passenger's airbag unit.






2. Attach the special tool 9516 in conjunction with special tool 9566.

3. Clear the fault memory.

4. Check whether the fault appears again.

a) If the fault does not appear again, replace the passenger's airbag unit.

b) If the fault appears again, check the wiring harness for pinches and chafing damage.

c) If no fault is found on the wiring harness, replace the triggering unit.

NOTE:

Fault Code 39

This fault path is checked only once after the ignition is switched on.

Proceed as described below to determine whether the fault was eliminated:

1. Clear the fault memory.

2. Switch off ignition.

3. Remove ignition key.

4. Switch on ignition.