Mirrors: Testing and Inspection

667801 Checking Function Of Heating For Mirror Glass

NOTE:
- The function of the heating for the mirror glass can be checked with a temperature probe with digital display.
- The indicator light in the rocker switch also lights up if a fault is present and the heating wires in the mirror glass do not warm up.

Checking with temperature probe
- The tip of the sensor is used to measure from the outside on the centre of the mirror glass.






NOTE:
- After switching on at room temperature, the temperature must increase by approx. 2 degrees after 1 minute.
- If no temperature increase is shown, the fault must be detected on the basis of the wiring diagram.