Disassembling and Assembling Engine - II

Disassembling And Assembling Engine

Overview Of Working Positions

The topic 'Disassembling and assembling engine' includes the following items:
- Item 1 Removing and installing intake distributor
- Item 2 Removing and installing drive belt
- Item 3 Removing and installing deflection rollers and tensioning roller for drive belt
- Item 4 Removing and installing oil pump with coolant guide housing
- Item 5 Removing and installing oil pan with partition box, air/oil separator and oil suction pump
- Item 6 Removing and installing camshafts
- Item 7 Disassembling and assembling cylinder head
- Item 8 Disassembling and assembling crankcase
- Item 9 Removing and installing pistons
- Item 10 Removing and installing intermediate shaft on bearing housing
- Item 11 Disassembling and assembling bearing housing with crankshaft

Intake Distributor, Drive Belt, Deflection Rollers And Tension Rollers







- Item 1 Disassembling and assembling intake distributor
- Item 2 Removing and installing drive belt
- Item 3 Removing and installing deflection rollers and tensioning roller for drive belt

Coolant Guide Housing With Oil Pump, Oil Pan With Partition Box, Air/Oil Separator And Oil Suction Pump







- Item 4 Removing and installing coolant guide housing with oil pump
- Item 5 Removing and installing oil pan with air/oil separator (swirl pots) and oil suction pump

Camshafts, Cylinder Head, Crankcase Halves







- Item 6 Removing and installing camshafts
- Item 7 Disassembling and assembling cylinder head
- Item 8 Disassembling and assembling crankcase halves


Pistons, Intermediate Shaft, Bearing Housing







- Item 9 Removing and installing pistons
- Item 10 Removing and installing intermediate shaft on bearing housing
- Item 11 Disassembling and assembling bearing housing with crankshaft