Wear Limits

Technical Data/Brake Wear Limit - Turbo





Technical Data - Turbo With Cast Iron Brake Discs





Wear Limit Technical Data - Turbo With Cast Iron Brake Discs

Depending on the wear of cast iron brake discs, two condition criteria can make replacement necessary:
1. Cracking in the holed (perforated) brake disc friction plates is in an advanced state.
2. Brake disc minimum thickness is not attained due to wear (material erosion due to friction).


Technical data/Brake wear limit - Turbo with PCCB





Technical data - Turbo with ceramic brake discs (PCCB)








Wear limit technical data - Turbo with ceramic brake discs (PCCB]




Technical data/Brake wear limit - GT2








Technical Data - GT2

The first GT2 vehicles will start without PCCB. Instead of this a conventional braking system will be installed with the following deviating specification:
^ 6-piston front fixed caliper, Piston rear fixed caliper
^ Front and rear fixed caliper painted yellow / front fixed caliper, identical part to PCCB
^ Other front and rear brake pads (brake pad version) as for PCCB
^ 350 mm cast iron front brake discs
^ 330 mm cast iron rear brake discs





Wear limit technical Data - GT2

Two condition criteria can make replacement necessary depending on the wear of PCCB brake discs:
1. Surface changes in the brake disc friction surfaces at an advanced stage.
2. Brake disc minimum thickness is not attained due to wear (material erosion due to friction).