Test Point 14

Test point 14
Washer fluid level

- Ignition on
- Engine off
PST2 display: OK

- Check washer fluid level
- Switch off ignition
- Washer fluid level full
- Pull off plug on sensor for fluid level display

- Ohmmeter directly on sensor for fluid level display, pin 1 and pin 2
Ohmmeter display: [<] 5 Ohms

- If not, replace sensor for fluid level display.
- Ohmmeter on plug of sensor for fluid level display pin 2 and ground
Ohmmeter display: [<] 5 Ohms

- Pull off plug lion the instrument cluster
- Ohmmeter on instrument cluster plug II pin 26 and plug on sensor for fluid level display, pin 1
Ohmmeter display: [<] 5 Ohms

- See also Drive Links, "Washer fluid warning light"