Test Point 13

Test point 13
Left door secured but not locked

Fault code 13
1. Pull off plug I on the alarm control module.
2. Disconnect plug connection X 11 (driver's side).
3. Check the lead from the alarm control module plug I pin 30 to the door lock module for short to ground.
- Ohmmeter on alarm control module plug I pin 30 and ground.
Display: Infinity Ohms

4. Check driver's side door lock module switch contact.
- Ohmmeter at plug connection X 11 pin A5 (sleeve side) and ground.
Door locked
Display: Infinity Ohms

Door not locked
Display: < 5 Ohms