Test Point 4

Note:
The specified voltage values are reference values.

TEST POINT 4
Terminal 58

- Engine off

- Parking light off

- PST 2 display: 0

- Engine off

- Parking light on

- PST 2 display: 1

If 0 is displayed with the parking light on:

1. Check fuse A-5

2. Pull plug off the control module

- Switch parking light on

- measure voltage between terminal 10 and ground

Voltmeter display: > 10 Volts

If the signal (terminal 58) is present at the control module, replace the control module. Check the wire if the signal (terminal 58) is not present at the control module.

Note:
The headlights are not raised when high beam is activated if there is an open circuit at terminal 58 or if the control module is faulty.