Topping Up ATF

Topping up ATF

Note!
^ The test conditions also apply for topping up.
^ Top up only with ATF approved by Porsche.

Note!
^ To undo and tighten the cap nut on the charging valve, counter with an open-ended wrench.

1. Screw off cap nut for the charging valve.





2. Screw special tool 9507/1 -A- onto the charging valve and top up ATF via the charging valve until excess ATF emerges at the control bore.
3. Replace sealing ring for cap nut.
4. Screw on cap nut for charging valve.
Tightening torque: 40 Nm (30 ft. lbs.)