Operation CHARM: Car repair manuals for everyone.
Home >> Porsche >> 2005 >> 911 Carrera 4S Cabriolet (996) F6-3.6L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Radio, Stereo, and Compact Disc >> Testing and Inspection >> Component Tests and General Diagnostics >> Control Module Function - External Harman Amplifier

Control Module Function - External Harman Amplifier



Control Module Function - External Harman Amplifier

Terminating resistors on the CAN
Terminating resistors are fitted to each end of the wiring to prevent reflection on the wiring. These terminating resistors are integrated into each control module. The interconnection prevents the resistors from being measured with the ohmmeter from the outside.

CAN comfort
Communication between the Porsche System Tester II 9588 and the MOST control modules only takes place via the K lead to the instrument cluster. The data is transferred from the instrument cluster gateway to the MOST control modules, via CAN Comfort to the PCM2 gateway, via the electrical MOST in the PCM2 and via the optical MOST outside of the PCM2.

CD changer (CDC)
The CDC is available as an optional feature and is linked to the PCM2 via the optical waveguide.

Coding table


Coding Table (Part 1):




Coding Table (Part 2):




Coding Table (Part 3):






Coding
Under the menu item Modify coding, the PCM2 codes can be coded on a vehicle and country-specific basis.

Menu item
- Vehicle type vehicle coding


Function
The external Harman amplifier corresponding to the vehicle type can be coded using this menu item.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select 911 (996) in the Vehicle type menu and confirm with the >> key.
- Select PCM in the Control module menu and confirm with the >> key.
- Select External Harman amplifier in the 911 (996) PCM2 function selection and confirm with the >> key.
- Select Coding in the 911 (996) external Harman amplifier function selection and confirm with the >> key.
- Select Vehicle type vehicle coding in the 911 (996) external Harman amplifier function selection and confirm with the >> key.
- Select 911 (996) in the menu and code with the F8 key.

Menu item
- Vehicle version vehicle coding

Function
Under this menu item, the PCM2 GW corresponding to the vehicle version can be coded.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select 911 (996) in the Vehicle type menu and confirm with the >> key.
- Select PCM in the Control module menu and confirm with the >> key.
- Select External Harman amplifier in the 911 (996) PCM2 function selection and confirm with the >> key.
- Select Coding in the external Harman amplifier function selection and confirm with the >> key.
- Select Vehicle type vehicle coding in the external Harman amplifier coding function selection and confirm with the >> key.
- Select the relevant version Coupe, Cabrio, Targa in the menu and code with the F8 key.

Menu item
- Right/left-hand drive vehicle coding

Function
Under this menu item, the external Harman amplifier corresponding to the vehicle configuration can be coded.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select 911 (996) in the Vehicle type menu and confirm with the >> key.
- Select PCM in the Control modules menu and confirm with the >> key.
- Select External Harman amplifier in the PCM2 function selection and confirm with the >> key.
- Select Coding in the external Harman amplifier function selection and confirm with the >> key.
- Select Right/left-hand drive vehicle coding in the external Harman amplifier coding function selection and confirm with the >> key.
- Select Right or left-hand drive in the menu corresponding to the vehicle equipment and code with the F8 key.
pro multis · About Operation CHARM