Connector Assignment, Control Module

Connector Assignment, Control Module

Connector Assignment, Control Module:

Three colour-coded 26-pole connectors are connected to the instrument cluster.

Assignment of plug I (blue)

Pin Designation
1 ABS-SILA
2 Parking brake
3 ASR/ABO Info, PSM
4 ASR/ABO-SILA (TC)
5 PSM OFF
6 Left indicator light
7 Right indicator light
8 High beam
9 Oil pressure sensor
10 LED dim, terminal 58d
11 Bulb dim, terminal 58d
12 Extend spoiler relay
13 Speedometer A
16 Cruise control
17 Outside temperature
18 Coolant temperature
19 Oil level
20 Fuel level sensor
21 K diagnosis
22 Tank status
23 Brake pad wear
24 Analog ground
25 Retract spoiler relay
26 Engine run signal

Assignment of plug II (white)
2 Tiptronic POS. LTG. 4
3 Tiptronic POS. LTG. 3
4 Brake fluid level
5 Engine-compartment blower coolant level switch
6 Oil pressure switch
7 Washer fluid level
8 Central locking system locked
9 Spoiler extended check
10 Retract spoiler button
11 Extend spoiler button
12 Door contact
13 KVA DME
14 Terminal 58
15 TN signal speed
16 HL speed
17 Tiptronic status
18 Tiptronic POS. LTG. 1
19 Tiptronic POS. LTG. 2
20 Top lever
21 Bottom lever
22 Front lever
23 Battery charge
24 Belt warning
25 Rear lever
26 Spoiler retracted check

Assignment of plug III (black)
1 Key contact, terminal 86s
2 Check engine
6 Information system IN
8 Terminal 31
9 Park Assistent input
10 Terminal 30
11 Information system OUT
12 Terminal 15
13 Brake pad wear +
14 Airbag
15 Roll-over protection
16 Cabrio convertible top
20 ABS-N-SILA FOR
21 Terminal 31
23 Terminal 30(power of)
24 LED dim, terminal 31d
25 Terminal 15
26 Idle period