Fault Code 9112

Fault Code 9112

Tiptronic control unit

Diagnostic conditions
- Ignition on

Possible cause of fault
- Due to a faulty component, the Tiptronic control module has switched off (limp-home) or Tiptronic control module is faulty
- Open circuit of CAN-high drive
- Open circuit of CAN-low drive

NOTE:
- The CAN drive bus is connected to the following control modules.
- DME
- Tiptronic
- PSM and steering angle sensor
- Instrument cluster

Affected pins
Instrument cluster connector A pin 15 and pin 31

Diagnosis/troubleshooting

Diagnosis/troublestooting: