8009 CD Changer

8009 CD Changer

Mechanical fault while removing audio CD from reader

Diagnostic conditions
- Ignition on
- PCM2/CDR23 ON
- Functional audio CD inserted correctly in CD changer
- Start CD changer

NOTE:
- Fault code 8003 is recorded in the PCM2 MMI/CDR23 if the operating buttons are actuated for 1 minute or longer.
- Deactivate the automatic traffic announcement before performing the diagnosis on the PCM2/CDR23. If this is not done, the diagnosis will abort.

Possible cause of fault
- CD changer faulty

NOTE:
- The MOST optical waveguide is connected to the following control modules.
- PCM2/CDR23
- CD changer
- Amplifier
- Telephone/telematics

Affected terminals

Diagnosis/troubleshooting

Diagnosis/troubleshooting: