Installing

Installing middle radiator
1. Insert middle radiator into bracket. Make sure that the rubber sleeves of the radiator are inserted into the corresponding cutout on the bracket or retaining bracket. Screw in two fastening screws on retaining bracket Tightening torque 10 (7.5) Nm (ft. lbs.).

Note: The help of a second person is required in order to remove and install the middle radiator.

2. Get a helper to assist in moving the middle radiator into installation position and connect the two side Henn couplings for the coolant hoses until they click into place. Check that the Henn couplings are engaged correctly. Screw two fastening screws at the top -3and two fastening nuts at the bottom -2-of the radiator bracket hand-tight.
3. Tighten all fastening screws and fastening nuts on radiator bracket Tightening torque 23 (17) Nm (ft. lbs.).
4. Check that middle radiator is in the correct installation position.

Subsequent work
Subsequent work for installing middle radiator
Installing air guide
Removing and installing front apron. Filling with coolant.