Flywheel

Engine M96/01
Double-mass flywheel to crankshaft M10 x 1 x 50 Nm (12.9 ft. lbs.)
Initial tightening 25 Nm (19 ft. lbs.)
Final tightening 1 x 90° turn
Thrust plate to double-mass flywheel M8 23 Nm (17 ft. lbs.)

M96/79 Engine - GT3
Flywheel to crankshaft Nm (internal serration ft. lbs.) M10 85 Nm (63 ft. lbs.)

M96/03 Engine
Double-mass flywheel on crankshaft: initial tightening + final tightening M10 x 1 x 50 Nm (12.9 ft. lbs.)