Removing and Installing Cover For Instrument Panel (Defroster Cover)

702019 Removing And Installing Cover For Instrument Panel (Defroster Cover)

Preliminary work
Remove A-pillar trim panel.

Removing cover for instrument panel (defroster cover)

Overview, removing and installing cover for instrument panel (defroster cover):

Removing middle cover:

1. Insert plastic wedge under instrument panel cover (defroster cover) centre -1- and lever out in upward direction -arrow-.
2. Disconnect plug connection for sun sensor.

Removing cover for instrument panel (defroster cover) on right and left

Overview, removing and installing cover for instrument panel (defroster cover):

Removing side cover:

1. Insert plastic wedge under instrument panel cover (defroster cover) left and right -4- and lever out of sheet metal clips -5-.

Installing cover for instrument panel (defroster cover)

Installing cover for instrument panel (defroster cover) on right and left

Overview, removing and installing cover for instrument panel (defroster cover):

1. Check sheetmetal clips -5- for deformation; replace if necessary.

Installing side cover:

2. Clip cover for instrument panel (defroster cover) into place on left and right -4-.

Installing cover for centre instrument panel (defroster cover)

Overview, removing and installing cover for instrument panel (defroster cover):

1. Lock plug connection for sun sensor.

Install middle cover:

2. Position cover for centre dashboard (defroster cover) -1- and clip in -arrow-.

Subsequent work

Reworking
Install A-pillar trim panel.