Removing and Installing Auxiliary Headlight

947119 Removing And Installing Auxiliary Headlight

Removing auxiliary headlight

NOTE: The key-card for unlocking the auxiliary headlamp is in the on-board folder.

1. Insert the key-card at the side of the auxiliary headlamp.

Unlocking the auxiliary headlamp:

2. By pressing the card in -A-, the auxiliary headlamp is unlocked. It is possible that the second engagement needs to be unlocked by pressing the card again.
3. Remove auxiliary headlamp. When removing the auxiliary headlamp, make sure that the ventilation connection piece - required for re-installation - is attached to the auxiliary headlamp.

Unlocking plug connections:

4. Disconnect the electrical plug connections -1, 2, 3- (unlock) -A-, and remove auxiliary headlamps.

Installing auxiliary headlight

ATTENTION:
Auxiliary headlamp is inserted into the front spoiler at a tilt.
- Paint damage on the front spoiler.
- Carefully insert auxiliary headlamp into the guides of the front apron.
- Make sure that the guide of the housing is inserted into the guide of the front spoiler.

1. Make sure that the ventilation connection piece is correctly seated on the auxiliary headlamp.

Wire routing:

2. Connect the electrical plugs to the auxiliary headlamp, pressing until they audibly click into place.
3. Make sure that the electrical lines are in the guides correctly.

Snapping auxiliary headlamp into place:

4. Insert auxiliary headlamp into front spoiler -A- and press -B- until you feel the auxiliary headlamp snap into place.

Subsequent work

Reworking auxiliary headlight

Adjusting auxiliary headlight:

NOTE:
- On installing a new auxiliary headlight, the adjustment must be checked with a headlight adjustment unit and adjusted if necessary.
- Use hexagon socket wrench insert size 4 through opening in front spoiler and adjust the auxiliary headlight.