Removing and Installing Air Cushion Switch

720619 Removing And Installing Air Cushion Switch

Preliminary work
Remove control module trim panel (electric).l

Removing air cushion switch






1. Unscrew the two fastening screws -1- and remove control unit for memory seat adjustment together with the support -2- from the seat frame.






2. Unlock and pull off the three connectors on the control unit for memory seat adjustment -arrows a-.






Removing switch for air cushion






1. Remove the two tie-wraps -2- on wire harness of switch for air cushion -1-.






2. Pull plug connection -3- out of holder -4- (-arrow B-).
3. Release plug connection -3- (-arrow a-) and disconnect it -arrows C-.

Installing air cushion switch

Installing switch for air cushion
1. Push plug connection -3- together -arrows A- until it engages securely.






2. Push plug connection -3- into holder -4- (-arrow B-).
3. Lay wire harness of switch for air cushion -1- and secure with two new tie-wraps -2-.

Installing control unit for memory seat adjustment with support
1. Attach the three connectors on the control unit for memory seat adjustment until they are felt to engage.






2. Position control unit for memory seat adjustment with support -2- on seat frame and secure with both fastening screws -1-.






Subsequent work
Install control module trim panel (electric).