Installing the Sealing Ring For the Flanged Shaft (Front Wheel Drive)

Installing the sealing ring for the flanged shaft (front wheel drive)





1. Fill the space between the dust and sealing lips -arrow- on the new sealing ring with grease (e.g. Liqui - Moly).





2. Drive in the sealing ring with the special tool pressure piece 9537 -arrow- up to the mounting face. To do so, use a rubber hammer on the centre of the pressure piece.





3. Always replace the snap ring for the halfshaft flange. To do this, clamp the flange in the vice with protective jaws and press out the old snap ring with the new snap ring -A-.

A New snap ring

Note!
^ Do not damage the drive shaft teeth when replacing them.





4. Grease the snap ring thoroughly and drive in the halfshaft flange -arrow-.
5. Check oil in front final drive.
6. Mount front drive shaft.