Installing Sealing Ring For Halfshaft Flange

Installing sealing ring for halfshaft flange





1. Fill the space between the dust and sealing lips with grease (e.g. Liqui-Moly) and drive in the sealing ring up to the mounting face with special tool pressure piece 9252.
2. Push in the halfshaft flange and tighten the fastening screw.
Tightening torque: 44 Nm (32 ft. lbs.).
3. Clip the B+ cable onto the air flange and mount the drive shaft.
Tightening torque: 81 Nm (60 ft. lbs.)