Removing and Installing Centre Console Cover

Removing And Installing Centre Console Cover

Technical values







Preliminary work

INFORMATION: Only for vehicles with additional receiver for telephone.

1. Remove bracket for telephone. Refer to Removing and installing bracket for telephone

Removing centre console cover

Removing footwell outlet vent cover







1. Unscrew fastening screw -1- and take out footwell outlet vent cover -2-.







INFORMATION: Only passenger's side.

2. Release electric connector -arrow A- and pull off from the socket.
3. Check fastening nut -3-, replace if necessary.

Removing centre console cover







1. Unscrew fastening screws -1- and take off cover for centre console -2-.







2. Check fastening nut -3-, replace if necessary.

Installing centre console cover







1. Position cover for centre console -2- and screw down using the fastening screws -1-. Tightening torque: 1.5 ftlb. ± 0.15 ftlb..







Installing footwell outlet vent cover







INFORMATION: Only passenger's side.

1. Push electric connector onto socket -arrow- until connector is felt to engage.







2. Insert footwell outlet vent cover -2- into centre console cover -3- and screw down the fastening screw -1-. Tightening torque: 7.5 ftlb.

Subsequent work

INFORMATION: Only for vehicles with additional receiver for telephone.

1. Install bracket for telephone. Refer to Removing and installing bracket for telephone