G8.3 - Painting Spoilers

G 8.3 Painting Spoilers

G 8.3.1 Basic procedure for painting spoilers

WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.

NOTE:
- The new 928 spoiler must be baked for 30 minutes at 70-80° C.
- This stabilizes the component in such a way that it cannot bend out of shape.
- If possible, do not sand primer through to bare material on spoilers that are supplied primed ex-works.

G 8.3.1.1 Phase I - Preparation







G 8.3.1.2 Phase II - Primer







G 8.3.1.3 Phase III - Topcoat finish







G 8.3.1.4 Phase IV - Clear lacquer finish







G 8.3.2 Painting GFK/SMC spoilers

WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.

G 8.3.2.1 Phase I - Preparation







G 8.3.2.2 Phase II - Primer

Step 1: Prime areas sanded through to bare material with 285-16 VOC







Step 2: Fill with Glasurit(R) HS VOC Primer Filler 285-51 VOC (or 285-60 VOC, 285-95 VOC)







G 8.3.2.3 Phase III - Topcoat finish







G 8.3.2.4 Phase IV - Clear lacquer finish







G8.4 - Front and Rear Aprons