Brake Lamp: Service and Repair

947019 Removing And Installing Auxiliary Brake Light

Removing auxiliary brake light
1. Open the convertible top compartment lid using the convertible top release and remove ignition key.
2. Unscrew the two fastening screws -1- for the auxiliary brake light and turn the light 90 degree.
3. Release electric connector -A- and pull it off the light.

Installing auxiliary brake light
1. Push electric connector onto the auxiliary brake light until the connector is felt to engage.
2. Fit auxiliary brake light and screw down with the two fastening screws -1-.
3. Check operation of auxiliary brake light.