With Manufacturer's Scan Tool

Diagnosis/Troubleshooting

NOTE: The fault memory Info key [F8] on the Porsche System Tester II No. 9588 can be used to access the 'extended fault memory'. The following information can be displayed:

Fault type
The following fault types are possible:
- No display
- Upper limit value exceeded
- Lower limit value not reached
- Mechanical fault
- No signal/communication
- No or incorrect basic setting/adaptation
- Short circuit to B+
- Short circuit to ground
- Implausible signal
- Open circuit/short circuit to ground
- Open circuit/short circuit to B+
- Open circuit
- Electrical fault in electric circuit
- Please read out fault memory
- Faulty
- Cannot be checked now

Fault status
The following status types are possible:
- Present
- Not present

This information should be saved using the Save key [F4] and printed out.
1. Erase fault memory
2. Satisfy the requirements listed under 'Diagnostic conditions'
3. Read out fault memory again