CD Changer: 8003
8003 CD changerAudio CD read error (formatting error on CD)
Diagnostic conditions
- Ignition on.
- PCM2/CDR23 ON
- Manual actuation
NOTE:
- Fault code 8013 is recorded in the PCM2 MMI/CDR23 if the operating buttons are actuated for '≥one 'or more minutes.
- Deactivate the 'automatic traffic announcement' before performing the diagnosis on the PCM2. If this is not done, the diagnosis will abort (applies only to software version number < 03).
Possible cause of fault
- CD changer faulty
Affected pins
-
Diagnosis/troubleshooting
