P1760

P1760

Speed Sensor Failed

Diagnostic conditions:
- Switch on ignition (if necessary, switch off first)
- Internal function test completed

Possible fault causes:
- Faults "P0721 Speed centre and" and "U0418 PSM Fault control unit" (wheel speeds) detected

Fault reaction:
- A warning is displayed in the instrument cluster.
- The transmission is shifted into mechanical limp home mode, i.e.:
- The pressure adjuster and solenoid valves are switched off.
- This opens the torque converter lockup clutch and 4th gear is firmly selected.
- The gear display shows 4th gear.