Hood: Adjustments

WM 552215 Adjusting front lid

Tools





Technical values





Adjusting front lid

Adjusting lid in X and Y direction





Main illustration for adjusting front lid

Information

Use star gauges to set and measure the gap dimensions. Star gauges for body gap dimensions NR.127-1

1. Check body gap dimensions. -> 5000IN IN -Diagram - body gap dimensions





Adjusting lid in X and Y direction

2. Loosen fastening screw -1- on both sides on front lid -2-.

Adjusting lid in Z direction





Main illustration for adjusting front lid

1. Loosen fastening screws -1- on both front lid hinges -2-.





Adjusting lid in Z direction

Adjusting front lid





Main illustration for adjusting front lid

1. By moving the front lid -2- at the hinges -2- , adjust the contours to the wings, main headlights and front apron. -> 5000IN IN Diagram - body gap dimensions





Adjusting front lid

2. Tighten fastening screws -1-. Tightening torque => : 7.2 ftlb.
3. Tighten fastening screws -1-. Tightening torque => : 7.2 ftlb.