72921900 Removing and installing motor for rear vertical adjustment

WM 729219 Removing and installing motor for rear vertical adjustment

Technical values





Preliminary work

Remove front seat. -> 720119 Removing and installing front seat - section on "Removing" 720119 Removing and Installing Front Seat

Removing motor for rear vertical adjustment





Installation position of motor for rear vertical adjustment

1. Pull connector -1- off the motor for rear vertical adjustment -3-.





Removing motor for rear vertical adjustment

2. Unscrew the two fastening screws -2- and remove motor for rear vertical adjustment -3-.
3. Pull drive shaft -1- out of the gear mount -2- and check for damage.





Removing drive shaft

Installing motor for rear vertical adjustment

1. Insert the drive shaft -1- into the gear mount -2- by twisting slightly.





Installing drive shaft

2. Push motor for rear vertical adjustment -3- onto the drive shaft by twisting slightly and secure with the two fastening screws -2-. => Tightening torque: 7 Nm (5 ftlb.)





Installing motor for rear vertical adjustment

3. Attach connector -1- to motor for rear vertical adjustment -3- until it engages firmly.

Subsequent work

Install front seat. -> 720119 Removing and installing front seat - section on "Installing" 720119 Removing and Installing Front Seat