Removing and Installing Air Cushion Motor

Removing And Installing Air Cushion Motor

Preliminary work

Remove front seat. Refer to Removing and installing front seat.

Removing air cushion motor










1. Unscrew the two fastening screws -1- on the support -2-.
2. Set support -2- with connected motor and air cushion control valve aside.







3. Remove the two tie-wraps -1- on the air cushion motor -2-.
4. Release plug connection -3- -arrow a- and disconnect -arrows B-.
5. Pull off the white hose -4- from the air cushion control valve -arrow C- and remove the air cushion motor -2-.

Installing air cushion motor







1. Position air cushion motor -2- and push on the white hose -4- onto the air cushion control valve -arrow A-.
2. Push the plug connection -3- together -arrows B- until it is felt to engage.

INFORMATION:
- Observe hose routing.
- Ensure that no hoses are disconnected by the tie-wraps.

3. Secure air cushion motor -2- onto support using two new tie-wraps -1-.







4. Position support -2- with connected motor and air cushion control valve and screw down with the two fastening screws -1-.

Subsequent work

Install front seat. Refer to Removing and installing front seat.