681219 Removing And Installing Lid For Glove Compartment

681219 Removing And Installing Lid For Glove Compartment

Preliminary work
Remove glove compartment.

Removing lid for glove compartment

Installation position of glove compartment lid

Installation position of glove compartment lid:

1. Open the glove compartment.

Pressing out shock absorber for glove compartment:

2. Press shock absorber for glove compartment -1- carefully out of the fastening tab -2-.

Removing stop:

3. Turn stop -1- 45° in -direction of arrow- and remove it.

Removing lid for glove compartment:

4. Drive out pin rod -3-, remove washer -4- and then detach the lid -1- from the glove compartment -2- (-direction of arrow-).

Installing lid for glove compartment

Installation position of glove compartment lid:

1. Check rubber stops to the left and right -2- before installing the glove compartment lid -1- and replace them if necessary.

Checking rubber stops:

2. Position lid -1- and washer -4- on the glove compartment -2- and press in the pin rods -3- (-arrows-).

Installing lid for glove compartment:

3. Close the glove compartment slightly, position stop -1- on the lid and turn 45° in -direction of arrow-.

Installing stop:

4. Press shock absorber for glove compartment -1- into the fastening tab -2-.

Pressing in shock absorber for glove compartment:

5. Close glove compartment.

Subsequent work
Install glove compartment.