Removing and Installing Air Cushion Control Valve

Removing And Installing Air Cushion Control Valve

Preliminary work

Remove front seat. Refer to Removing and installing front seat.

Removing air cushion control valve







1. Unscrew the two fastening screws -1- on the support -2-.







2. Set support -2- with connected motor and air cushion control valve aside.
3. Release connector -1- on air cushion control valve -arrow a- and pull it off.







4. Pull off the three hoses -2- from the air cushion control valve.
5. Unscrew fastening screw -1- and remove air cushion control valve -2-.







Installing air cushion control valve

1. Position air cushion control valve -2- and tighten with the fastening screw -1-.







INFORMATION:
- Observe the installation position of the hoses.
- Push on the blue hose onto the connection marked B and push on the red hose onto the connection marked R.

2. Push on the three hoses -2- onto the air cushion control valve.







3. Push on connector -1- onto air cushion control valve until this engages audibly.
4. Position support -2- with connected motor and air cushion control valve and screw down with the two fastening screws -1-.







Subsequent work

Install front seat. Refer to Removing and installing front seat.