558619 Removing And Installing Lower Part Of Lid Lock At Rear

558619 Removing And Installing Lower Part Of Lid Lock At Rear






Preliminary work
Remove air cleaner housing.

Removing lower part of lid lock at rear

Disconnecting electrical plug connection






1. Separate electrical plug connection -1- for lid release by pressing the locking tab -Arrow A- -Arrow B-.






2. Press locking tab on fastening clip -2- -Arrow C- and press plug up and out -Arrow D-.

Removing lower part of lid lock at rear






1. Unscrew fastening screws -1- from the lower part of lid lock at rear -2-.






Disconnecting the emergency release cable






1. Press out circlip -1- and pull out emergency release cable -2- from lower part of lid lock -3-.






Installing lower part of lid lock at rear

Installing the emergency release cable






1. Position emergency release cable -2- on lower part of lid lock at rear -3- and secure using circlip -1-.






Installing lower part of lid lock at rear






1. Position lower part of lid lock at rear -2- on the body and screw down with the fastening screws -1-.

Tightening torque - Final tightening: 7 ftlb.






Locking electrical plug connection






1. Lock plug -1- on fastening clip -2- until locking tab is felt to engage -Arrow A-.






2. Lock electrical plug connection -1- for lid release until locking tab is felt to engage -Arrow B-.

Subsequent work
1. Check adjustment of rear lid and if necessary adjust upper part of lid lock according to the lower part of lid lock.
2. Install air cleaner housing.