Removing and Installing Motor For Front Vertical Adjustment

728819 Removing And Installing Motor For Front Vertical Adjustment






Preliminary work
Remove front seat.

Removing motor for front vertical adjustment






1. Unscrew the two fastening screws -1- and remove control unit for memory seat adjustment together with the support -2- from the seat frame.






2. Unlock and pull off the three connectors on the control unit for memory seat adjustment -arrows a-.






Removing motor for front vertical adjustment






1. Pull connector -1- off the motor for front vertical adjustment -3-.






2. Unscrew the two fastening screws -2- and remove motor for front vertical adjustment -3-.
3. Pull drive shaft -1- out of the gear mount -2- and check for damage.






Installing motor for front vertical adjustment
1. Insert the drive shaft -1- into the gear mount -2- by twisting slightly.






2. Push motor for front vertical adjustment -3- onto the drive shaft by twisting slightly and secure with the two fastening screws -2-. Tightening torque: 7 Nm (5 ftlb.)






3. Attach connector -1- to motor for front vertical adjustment -3- until it engages firmly.

Installing control unit for memory seat adjustment with support
1. Attach the three connectors on the control unit for memory seat adjustment until they are felt to engage.






2. Position control unit for memory seat adjustment with support -2- on seat frame and secure with both fastening screws -1-.






Subsequent work
Install front seat.