Removing and Installing Bowden Cable For Backrest Release

722519 Removing And Installing Bowden Cable For Backrest Release

Preliminary work
1. Remove cushion carrier for front backrest.

Removing bowden cable for backrest release
1. Release backrest and tilt forwards.
2. Swivel pin -2- of bowden cable -1- up by 90° -arrow A- and disengage it -arrow B-






3. Press locking tab on fixing clip -3- outwards slightly and press fixing clip -3- down and out with a plastic hammer -arrow C-.
4. Swivel eye -2- of bowden cable -1- by 90° -arrow A- and pull it out of the locking lever.






5. Unclip fixing clip -3- from the backrest frame -1- (-arrow B-).
6. Pull bowden cable -1- up out of the backrest frame -arrows C-.

Removing backrest frame release
1. Disengage tension spring -1-.






2. Press retaining pins -2- out with a screwdriver and remove backrest frame release -3-.
3. Press out rubber stop -4-.

Installing bowden cable for backrest release

Installing backrest frame release
1. Press in rubber stop -4-.






2. Position backrest frame release -3- and secure with new retaining pins -2-.
3. Engage tension spring -1-.

Installing bowden cable for backrest release
1. Insert bowden cable -1- downwards into the backrest frame from above -Arrows A-.






2. Insert eye -2- of bowden cable -1- into the locking lever and swivel by 90° -Arrow B-.
3. Press fixing clip -3- with bowden cable into the backrest frame -Arrow C-.
4. Position fixing clip -3- on backrest frame and tap it upwards into place with a plastic hammer -Arrow A-.






5. Engage pin -2- of bowden cable -1- (-Arrow B-) and swivel downwards by 90 ° -Arrow C-.

Subsequent work

Reworking
1. Install cushion carrier for front backrest.