Position of Crankshaft In Relation to Intake Camshaft

P0020

Position of crankshaft in relation to intake camshaft

NOTE: This fault is entered if there is a permanent deviation from the nominal value of 10° camshaft angle.

Diagnostic conditions
- Battery positive voltage 10 ... 16 V
- Engine idling
- Camshaft adaptation has taken place
- No fault in camshaft sensor
- No fault in crankshaft sensor

Possible fault causes
- Camshaft sensor faulty (internal phase shift)
- Solenoid valve for camshaft adjustment soiled (does not close fully)
- Timing set incorrectly