720119 Removing and installing folding sports bucket seat
WM 720119 Removing and installing folding sports bucket seat
Technical values
Removing folding sports bucket seat
Loosening seat belt mount on sports bucket seat
Installation position of folding sports bucket seat
1. Loosen the seat belt mount on the sports bucket seat.
Loosening seat belt mount on sports bucket seat
1.1. Press out cap -1- with a screwdriver.
1.2. Unscrew fastening screw -2-.
1.3. Pull seat belt mount -3- out through the sports bucket seat -arrow- and remove spring washer -4- , spacer sleeve -5- and washer -6-.
Loosening sports bucket seat
1. Move sports bucket seat to the front end position.
2. Unscrew fastening screws -1- from the guide rails -2- ( -arrows- ).
Loosening sports bucket seat at rear
3. Move sports bucket seat to the rear end position.
Information
Caution! Locking lugs can break.
4. Insert a screwdriver -1- under the locking lugs and press upwards slightly -arrow A-.
Removing cover for guide rail
5. Pull cover for guide rail -2- forward and off -arrows-.
6. Unscrew fastening screws -1- from the guide rails -2- ( -arrows- ).
Loosening sports bucket seat at front
Disconnecting plug connection for AWS control unit
Information
- Only for passenger seat in USA/Canada vehicles.
1. Release connector -1- by actuating the locking lug -arrow A- and pull it off the AWS control unit -2- ( -arrow B- ).
Disconnecting plug connection on AWS control unit
Disconnecting central connector
1. Release the lock on the plug connection -1- ( -arrow A- ) and pull off the connector -2- ( -arrow B- ).
Disconnecting central connector
2. Unclip connector wire harness at the retaining clip -3- ( -arrow C- ).
3. Remove sports bucket seat from the vehicle.
Installing folding sports bucket seat
Locking central connector
1. Fit sports bucket seat into the vehicle and tilt it backwards.
2. Join the plug connection -1- ( -arrow A- ). Press in lock on plug connection at the side -2- ( -arrow B- ).
Locking central connector
3. Clip in connector wire harness at the retaining clip -3- ( -arrow C- ).
Locking plug connection for AWS control unit
Information
- Only for passenger seat in USA/Canada vehicles.
1. Plug in connector -1- on AWS control unit -2- ( -arrow- ) until the connector engages securely.
Locking plug connection on AWS control unit
Securing sports bucket seat
DANGER
Loosen the safety-related threaded joint.
- Danger of injury if sports bucket seat is not screwed down correctly.
-> Always replace fastening screws for the sports bucket seat.
-> Never make alterations to the micro-self-locking screws (e.g. never use lubricant, loosen bolts, and screw them down again).
1. Move sports bucket seat to the rear end position.
2. Secure guide rails -2- with the fastening screws -1- ( -arrows- ). => Tightening torque: 50 Nm (37 ftlb.)
Securing fastening screws at the front
3. Insert cover for guide rails -1- into the guide rails -arrow A- until the locking lug locks with an audible click -arrow B-.
Installing cover for guide rail
4. Move sports bucket seat to the front end position.
5. Secure guide rails -2- with the fastening screws -1- ( -arrows- ). => Tightening torque: 50 Nm (37 ftlb.)
Securing sports bucket seat at the rear
Securing seat belt mount to the sports bucket seat
Information
- Guide belt strap from the inside to the outside.
- Ensure that the belt strap can run properly.
1. Secure the seat belt mount to the sports bucket seat.
Securing seat belt mount to the sports bucket seat
1.1. Guide seat belt mount -3- through the sports bucket seat -arrow-.
1.2. Secure seat belt mount -3- to the sports bucket seat with the fastening screw -2- , spring washer -4- , spacer sleeve -5- and washer -6-. => Tightening torque: 50 Nm (37 ftlb.)
1.3. Press in cap -1-.