70581901 Removing and installing trim strip for the dashboard on the driver's side

WM 705819 Removing and installing trim strip for the dashboard on the driver's side

Removing trim strips for dashboard on the driver's side





1. Opening door
2. Remove ignition key
3. Insert a plastic wedge under the ignition lock collar -1- , lever it out and remove it to the rear -Arrow A-.





4. Insert a plastic wedge under the trim strip on the driver's side -2 and 3- , carefully unclip it and take it off to the rear -arrow B-.






Installing trim strips for the dashboard on the driver's side

1. Clip in the trim strip on the driver's side -2 and 3- -Arrows A-





2. Push on the ignition lock collar -1- -arrow B- while turning it -arrow C- until it can be pushed in completely.