72631902 Removing and installing lock for 2/3-split folding rear backrest

WM 726319 Removing and installing lock for 2/3-split folding rear backrest

Technical values






Removing lock for 2/3-split folding rear backrest





1. Fold rear backrest forward.
2. Remove net partition: Pull net partition -1- out to the right -Arrow A-.





3. Unclip cover for rear backrest -4- at fastening clips -Arrow C- and pull out to the left -Arrow D-.





4. Undo fastening screws -2-.





5. Remove sliding pads for net partition -3- -Arrow B-.





6. Remove retaining clips -6-.





7. Remove cover of lock for rear backrest.
7.1. Unscrew fastening screws -8- , -9-.









8. Pull out cover of lock for rear backrest -7- -Arrow E-.





9. Disengage cover piping -11- -Arrow F-.





10. Undo fastening screws -12-.





11. Pull out lock for backrest -10- -Arrow G-.






Installing lock for 2/3-split folding rear backrest





1. Install lock for rear backrest: Insert lock for backrest -10- -Arrow A-.





2. Screw in and tighten fastening screws -12-. => Tightening torque: 20 Nm (15 ftlb.)+/-2 Nm (+/-1.5 ftlb.)





3. Engage cover piping -11- -Arrow B-.





4. Install cover of lock for rear backrest.
4.1. Insert cover of lock for rear backrest -7- -Arrow C-. The release lever guides -13- must engage perfectly in the supports of the locking mechanism -14-.









5. Screw in fastening screws -8- -9- and tighten to the specified torque. => Tightening torque: 4.5 Nm (3.5 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.) => Tightening torque: 2.5 Nm (2.0 ftlb.)









6. Insert cover for rear backrest -4- -Arrow D- and clip in at the fastening clips -Arrow E-.





7. Push on retaining clips -6- - the springs -arrows- must be pointing left, to the centre of the vehicle.





8. Insert sliding pads for net partition -3- -Arrow F-.





9. Screw in and tighten fastening screws -2-. => Tightening torque: 8 Nm (6 ftlb.)+/-1 Nm (+/-0.5 ftlb.)





10. Insert net partition -1- to the left -Arrow G-.





11. Fold rear backrest back.