741319 Removing and installing cover for front seat

WM 741319 Removing and installing cover for front seat

Tools






Removing cover for front seat





1. Remove padding for front seat. -> 741019 Removing and installing padding for front seat - section on "Removing" 741019 Removing and installing padding for front seat

Information

- Only in cars with seat heating.





2. Release plug connection -Arrow A- and disconnect it -Arrows B-.





3. Loosen staples -a- together with cover for padding on right and left -arrow-.





Information

- Release seat cover from the padding, starting from the outside.

- Do so in the following sequence: left/right, front/rear, middle.

4. Cut open cushion clips 00000 -b- with side cutters -1- and remove cover from padding -arrow-.






Installing cover for front seat





1. Place cover on the padding -arrow- and align with contour of padding.





Information

- Fasten seat cover to the padding, starting from the inside.

- Do so in the following sequence: middle, front/rear, left/right.

2. Fasten cover to the padding using cushion clip pliers NR.130 -2- and new cushion clips 00000 -b-.





3. Fasten cover to the padding right and left using staple gun NR.163 -3- and new staples.





Information

- Only in cars with seat heating.





4. Push together plug connection -Arrows A- until the locking tabs -Arrow B- are felt to engage.





5. Install padding for front seat.

-> 741019 Removing and installing padding for front seat - section on "Installing" 741019 Removing and installing padding for front seat