Cylinder Head

Cylinder Head







The one piece cylinder head is made of an aluminum silicon copper alloy. The cylinder head is used both for mounting the chain drive and for connecting the fuel high pressure pump. The fuel injectors for both cylinder banks are on the intake side of the cylinder head.

The bores for the fuel injectors for cylinders 1, 3 and 5 are above the intake manifold flange. The fuel injectors for cylinders 2, 4 and 6 are inserted below the intake manifold flange. This arrangement allows the fuel injectors for cylinders 1, 3 and 5 to run through the intake port on the cylinder head.