745619 Removing and installing load-through provision

WM 745619 Removing and installing load-through provision

Removing load-through provision





1. Folding over rear seat and left rear seat back
2. Open up armrest -1- -Arrow A-.





3. Swivel the armrest cover -2- out over the backrest frame -Arrow B-.





4. Unclip locking tabs -3- of armrest cover -2- at the backrest frame -4- -Arrow C- and remove downwards -Arrow D-.









5. Remove cover of load-through provision: fold over cover for backrest -5- -Arrow E-.





6. Open front lid -6- -Arrow F-.





7. Unclip cover of load-through provision -7- -circle marks- and remove -Arrow G-.





8. Unclip load-through provision -8- -Arrow H- , press out to the rear -Arrow I- and pull up and out -Arrow K-.














Installing load-through provision





1. Insert load-through provision -8- -Arrow A- and push forward, until the locking tabs -arrow- audibly engage -Arrow B-.













2. Install cover of load-though provision: Insert cover of load-through provision -7- -Arrow C- and clip in -circle marks-.





3. Close front lid -6- -Arrow D-.





4. Fold over cover for backrest -5- -Arrow E-.





5. Insert armrest cover -2- from below -Arrow F- and clip onto the backrest frame using the locking tabs -3- -Arrow G-.









6. Swivel the armrest cover -2- in over the backrest frame -Arrow H-.





7. Close arm rest with cover -1- -Arrow I-.





8. Fold over rear seat and left rear seat back: