681419 Removing and Installing Cover For Bracket

WM 681419 Removing and installing cover for bracket

Preliminary work

Preliminary work for cover for bracket, driver's side

1. Remove trim panel under dashboard on the driver's side -> 701919 Removing and installing trim panel under dashboard - section on "Removing" 701919 Removing and installing trim under dashboard

Preliminary work for cover for bracket, passenger's side

1. Remove glove compartment. -> 681519 Removing and installing glove compartment - section on "Removing" Service and Repair

Removing cover for bracket





Installation position of cover for bracket

1. Unclip cover for bracket -1- using a plastic wedge at the retaining clips -2- and swivel it out -arrow A-.





Removing cover for bracket

2. Remove cover for bracket -1- to the rear -arrow B-.

Installing cover for bracket





Installation position of cover for bracket

1. Insert cover for bracket -1- at the front -arrow A-.





Installing cover for bracket

2. Swivel cover for bracket -1- inward -arrow B- and press it in until the retaining clips -2- click into place.

Subsequent work

Subsequent work for cover for bracket, driver's side

1. Install trim panel under dashboard on the driver's side -> 701919 Removing and installing trim panel under dashboard - section on "Installing" 701919 Removing and installing trim under dashboard

Subsequent work for cover for bracket, passenger's side

1. Install glove compartment. -> 681519 Removing and installing glove compartment - section on "Installing" Service and Repair