Removing and Installing Cover For Bracket

Removing And Installing Cover For Bracket

Preliminary work

Preliminary work for cover for bracket, driver's side

1. Remove trim panel under dashboard on the driver's side. Refer to Removing and installing trim panel under dashboard.

Preliminary work for cover for bracket, passenger's side

1. Remove glove compartment. Refer to Removing and installing glove compartment.

Removing cover for bracket







1. Unclip cover for bracket -1- using a plastic wedge at the retaining clips -2- and swivel it out -arrow A-.







2. Remove cover for bracket -1- to the rear -arrow B-.

Installing cover for bracket







1. Insert cover for bracket -1- at the front -arrow A-.







2. Swivel cover for bracket -1- inward -arrow B- and press it in until the retaining clips -2- click into place.

Subsequent work

Subsequent work for cover for bracket, driver's side

1. Install trim panel under dashboard on the driver's side. Refer to Removing and installing trim panel under dashboard.

Subsequent work for cover for bracket, passenger's side

1. Install glove compartment. Refer to Removing and installing glove compartment.