707555 Replacing sound absorber (insulation) for side trim panel

WM 707555 Replacing sound absorber (insulation) for side trim panel

Preliminary work

1. Remove accessories close to the sound absorber (insulation).

Information

- The sound absorbers (insulation) must always be replaced if they are damaged or cracked.

2. Remove sound absorber (insulation).
3. Remove all adhesive residue on the body/accessories and clean with cleaning solution.

Installing sound absorber (insulation) for side trim panel

Installing sound absorber for belt cover

Information

The fastening points must remain accessible when positioning the sound absorbers (insulation).

1. Pull off protective film and stick on sound absorber for bottom of belt cover -1-.





Installing sound absorber for belt cover

2. Pull off protective film and stick on sound absorber for top of belt cover -2-.