741019 Removing and Installing Padding For Front Seat
WM 741019 Removing and installing padding for front seat
Tools
Preliminary work
1. Remove cover for front seat. -> 741319 Removing and installing cover for front seat - section on "Removing" 741319 Removing and Installing Cover For Front Seat
Removing padding for front seat
Disconnecting wire harness for heated seats
Installation position of padding for seat
Information
Only for vehicles with heated seats.
1. Cut tie-wraps -1- and disengage wire harness -2- ( -arrow A- ).
Releasing wire harness on seat frame
2. Disconnect electric plug connection -3- for backrest seat heating -arrows B-.
3. Cut tie-wraps -1-
Cutting tie-wraps
4. Release connector socket -arrows a- and pull out of holder.
Pulling off connector socket
5. Remove tie-wraps -2- on connector socket -1-.
Disassembling connector socket
6. Release connector socket -1- ( -arrows a- ) and remove the three individual connectors -3-.
Information
Make sure not to trap or damage the wire harness when pulling it through.
7. Pull wire harness out through the seat frame.
Pulling out wire harness
Removing padding for seat
Installation position of padding for seat
1. Unclip fixing clip -1- underneath the padding -2- ( -arrow A- ).
Removing padding
2. Carefully detach padding -2- by hand from the seat frame -arrow B- and remove it -arrow C-.
3. Remove residual adhesive -1- and clean sealing surface of seat frame -2- with cleaning agent.
Removing residual adhesive
Installing padding for front seat
Installing padding for seat
Installation position of padding for seat
1. Apply adhesive -1- on the marked area of the padding -2-.
Applying adhesive
Information
Sealing surface of seat frame must be clean and free of grease.
2. Place padding -2- on the seat frame -arrow A- and align it with the seat frame -arrow B-.
Installing padding
3. Clip in fixing clip -1- underneath the padding -2- ( -arrow C- ).
Securing wire harness for heated seats
Installation position of padding for seat
Information
Only for vehicles with heated seats.
Information
Make sure not to trap or damage the wire harness when pulling it through.
1. Pull wire harness through the seat frame.
Pulling wire harness through
2. Connect electric plug connection -3- for backrest seat heating -arrows A-.
Securing wire harness on seat frame
3. Engage wire harness -2- ( -arrow C- ) and secure with new tie-wraps -1-.
4. Press the three individual connectors -3- into the connector socket -1- until they engage firmly.
Assembling connector socket
5. Put new tie-wraps -2- on the connector socket -1-.
6. Attach connector socket to support until it clicks into place.
Attaching connector socket
7. Secure wire harness -2- with new tie-wraps -1-.
Securing wiring harness
Checking seat following removal
1. Connect the removed seat to the vehicle's wiring harness via test cable 9745 and test cable 9745/1.
2. Connect electric plug to control module trim panel. -> 721619 Removing and installing control module trim panel - section on "Installing" 721619 Removing and installing control module trim panel
3. Connect the battery. -> 2706IN IN -Work instructions after disconnecting the battery External Power Connection, Jump Lead Starting
4. Switch on ignition.
5. Carry out a function check on the seat components.
6. Switch off ignition after function test and disconnect battery.
7. Disconnect test cable 9745 and test cable 9745/1.
Subsequent work
1. Install cover for front seat. -> 741319 Removing and installing cover for front seat - section on "Installing" 741319 Removing and Installing Cover For Front Seat