967919 Removing and Installing Control Unit For Garage Door Opener

WM 967919 Removing and installing control unit for garage door opener

Preliminary work

1. Remove front apron.-> 631519 Removing and installing front apron - section on "Removing"

Removing control unit for garage door opener

1. Release and pull off electric plug connection -1- ( -a- ).





Removing control unit for garage door opener

2. Open clip -2- and remove control unit for garage door opener out of the support.

Installing control unit for garage door opener

1. Insert control unit for garage door opener into the support and press the clip -2- together to secure it.





Installing control unit for garage door opener

2. Push in the electric plug connection -1- until the connector engages securely.

Subsequent work

1. Install front apron.-> 631519 Removing and installing front apron - section on "Installing"

Information

If the garage door opener was replaced, the remote controls (for the customer's garage door drives, for example) must be re-taught. -> 967955 Replacing control unit for garage door opener 967955 Replacing control unit for garage door opener