Diagnosis Information - PDK (Dual-Clutch Transmission)
P0563Diagnosis information - PDK
PDK control unit, supply voltage > 16.5 V
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are then tested and any faults are stored.
- Ignition on
- Engine at idle speed
Possible fault causes
- Generator faulty
Fault setting conditions
- Supply voltage > 16.5 V
Fault effects
- Power supply switch-off for pressure regulator
- Solenoid valve power supply switch-off
- Hydraulic control is switched off
- Start enable only in position P
- Limp-home message in instrument cluster