System Specifications
Fuel system
Fuel distributor pipe
1 - Fuel distribution pipe (fuel gallery)
2 - Stopper; in 3 turns (tighten, loosen, tighten) -> Tightening torque: 25 Nm (19 ftlb.)
3 - High-pressure sensor -> Tightening torque: 20 Nm (15 ftlb.)
Mount for fuel distribution pipe
1 - Screw, M6 x 16 -> Tightening torque: 10 Nm (7.5 ftlb.)
2 - Screw, M6 x 25 -> Tightening torque: 10 Nm (7.5 ftlb.)
3 - High-pressure line connection
4 - Connection to injector (high-pressure fuel injector); in 3 turns (tighten, loosen, tighten) -> Tightening torque: 25 Nm (19 ftlb.)
Injectors (high-pressure fuel injectors)
1 - Holder
2 - Screw, M8 x 30 -> Tightening torque: 23 Nm (17 ftlb.)
3 - Injector (high-pressure fuel injector)
High-pressure pump, turbo engine
1 - High-pressure pump
2 - High-pressure line; (3 turns: tighten, loosen, tighten) -> Tightening torque: 25 Nm (19 ftlb.)
3 - Screw, M6, for low-pressure line -> Tightening torque: 10 Nm (7.5 ftlb.)
4 - Low-pressure line; (3 turns: tighten, loosen, tighten); counter at hexagon on high-pressure pump -> Tightening torque: 25 Nm (19 ftlb.)
5 - Screw socket, M8 -> Tightening torque: 23 Nm (17 ftlb.)
6 - Screw socket, M6 -> Tightening torque: 10 Nm (7.5 ftlb.)
7 - Protective plate
8 - crew, M6 x 20 -> Tightening torque: 10 Nm (7.5 ftlb.)
Magnifing glass - Required line distance (5 to 8 mm) between components
High-pressure pump, naturally aspirated engine
1 - High-pressure pump
2 - High-pressure line; (3 turns: tighten, loosen, tighten) -> Tightening torque: 25 Nm (19 ftlb.)
3 - Screw, M6, for low-pressure line -> Tightening torque: 10 Nm (7.5 ftlb.)
4 - Low-pressure line; (3 turns: tighten, loosen, tighten); counter at hexagon on high-pressure pump -> Tightening torque: 25 Nm (19 ftlb.)
5 - Screw socket, M8 -> Tightening torque: 23 Nm (17 ftlb.)
6 - Screw socket, M6 -> Tightening torque: 10 Nm (7.5 ftlb.)
7 - Protective plate
8 - Screw, M6 x 20 -> Tightening torque: 10 Nm (7.5 ftlb.)
Magnifing glass - Required line distance (5 to 8 mm) between components