Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
9905019 Removing and installing horn
WM 905019 Removing and installing horn
Technical values
Preliminary work
1. Remove front apron. -> 631519 Removing and installing front apron - section on "Removing"
Removing horn
Installation position of horn
NOTICE
Voltage peaks
- Risk of damage to load or to the control unit
-> Switch off ignition and remove remote control before disconnecting or removing load.
1. Release the electric plug connections -1- and unplug them -arrow A-.
Removing horn
2. Unscrew the fastening nuts -2- on the horns -3-.
3. Remove horns -arrow B-.
Installing horn
1. Position the horns and tighten the fastening nuts for the horn to => Tightening torque: 9 Nm (6.5 ftlb.).
2. Plug in electric plug connections until they engage securely.
Subsequent work
1. Install front apron. -> 631519 Removing and installing front apron - section on "Installing"