Diagnosis Information - Control Unit DME (DFI)

P0563

Diagnosis information - Control unit DME (DFI)

Supply voltage

Diagnostic conditions
- Engine running > 6 Second(s)

Possible fault causes
- Supply voltage Vehicle electrical system too high > 5 Second(s) (e.g. Jump starting)
- Supply voltage Vehicle electrical system too low
- Contact resistance, Loose contact or corrosion on connectors or lines (Control unit DME (DFI))

Fault setting condition(s)
- Deviation Supply voltage:
- < 10 V (P0562)
or
- > 16 V (P0563)